Writing a Literature Review: Six Steps to Get You from Start to Finish

Writing a literature review is often the most daunting part of writing an article, book, thesis, or dissertation. "The literature" seems (and often is) massive. I have found it helpful to be as systematic as possible in doing this gargantuan task. This post describes one system for writing a literature review.

In their book, Destination Dissertation: A Traveler's Guide to a Done Dissertation, Sonja Foss and William Walters describe a highly efficient way of writing a literature review. I think it provides an excellent guide for getting through the massive amounts of literature for any purpose: in a doctorate program, for writing an M.A. thesis, or an article in any field of study.

Step One: Decide on your areas of research

Before you begin to search for articles or books, decide beforehand what areas you are going to research. Make sure that you only get articles and books in those areas, even if you come across fascinating books in other areas.

Step Two: Search for the literature:

Conduct a comprehensive bibliographic search of books and articles in your area. Read the abstracts online and download and/or print those articles that pertain to your area of research. Find books in the library that are relevant and check them out. Set a specific time frame for how long you will search. It should not take more than two or three dedicated time sessions.

Step Three: Find relevant excerpts in your books and articles:

Skim the contents of each book and article and look specifically for these five things:

1. Claims, conclusions, and findings about the constructs you are investigating
2. Definitions of terms
3. Calls for follow-up studies relevant to your project
4. Gaps you notice in the literature
5. Disagreement about the constructs you are investigating

When you find any of these five things, type the relevant excerpt directly into a Word document. Don’t summarize, as summarizing takes longer than simply typing the excerpt. Make sure to note the name of the author and the page number following each excerpt. Do this for each article and book that you have in your stack of literature. When you are done, print out your excerpts.

Step Four: Code the literature

Get out a pair of scissors and cut each excerpt out. Now, sort the pieces of paper into similar topics. Figure out what the main themes. Place each excerpt into a themed pile. Make sure each note goes into a pile. If there are excerpts that you can’t figure out where they belong, separate those and go over them again at the end to see if you need new categories. When you finish, place each stack of notes into an envelope labeled with the name of the theme.

Step Five: Create Your Conceptual Schema

Type, in large font, the name of each of your coded themes. Print this out, and cut the titles into individual slips of paper. Take the slips of paper to a table or large workspace and figure out the best way to organize them. Are there ideas that go together or that are in dialogue with each other? Are there ideas that contradict each other? Move around the slips of paper until you come up with a way of organizing the codes that makes sense. Write the conceptual schema down before you forget or someone cleans up your slips of paper!

Step Six: Begin to Write Your Literature Review

Choose any section of your conceptual schema to begin with. You can begin anywhere, because you already know the order. Find the envelope with the excerpts in them and lay them on the table in front of you. Figure out a mini-conceptual schema based on that theme by grouping together those excerpts that say the same thing. Use that mini-conceptual schema to write up your literature review based on the excerpts that you have in front of you. Don’t forget to include the citations as you write, so as not to lose track of who said what. Repeat this for each section of your literature review.

Once you complete these six steps, you will have a complete draft of your literature review. The great thing about this process is that it breaks down into manageable steps something that seems enormous: writing a literature review.

I think that Foss and Walter’s system for writing the literature review really can work for a dissertation, because a Ph.D. candidate has already read widely in his or her field through graduate seminars and comprehensive exams.

It may be more challenging for M.A. students, unless you are already familiar with the literature. It is always hard to figure out how much you need to read for deep meaning, and how much you just need to know what others have said. That balance will depend on how much you already know.

For faculty writing literature reviews for articles or books, this system also could work, especially when you are writing in a field with which you are already familiar. The mere fact of having a system can make the literature review seem much less daunting, so I recommend this system for anyone who feels overwhelmed by the prospect of writing a literature review.

How to Enhance Your Writing Productivity with a Pomodoro Timer

It is definitely not the beginning of the semester anymore. Nor is the end in sight. It is thus the perfect time for me to introduce a little trick to boost your writing productivity: the pomodoro technique.

Using a timer is a great way to keep track of your writing. I have used timers for years to measure how much time I spend writing, and to minimize the amount of time I spend surfing the web or checking email. The pomodoro has turned out to be the best timer I have used.

I have been using the pomodoro for about a month now, and am consistently amazed at how productive I am when I use it. In addition, I have shared this technique with several people, all of whom seem to become instant fans of it.

I decided to download a pomodoro technique app to my iphone after hearing the buzz about it for a while. Two academic productivity experts I follow, ProfHacker and Gina Hiatt, recommend the pomodoro timer, and I heard a few people mention it on Twitter on Facebook.

At first I thought it was just another timer, so there was no need for me to check it out. However, the pomodoro is more than a timer. It is actually a time management and productivity system. And, it is remarkably effective.

Here is how it works, from the Pomodoro Technique website:

THE BASIC UNIT OF WORK IN THE POMODORO TECHNIQUE® CAN BE SPLIT IN FIVE SIMPLE STEPS:
1. Choose a task to be accomplished
2. Set the Pomodoro to 25 minutes (the Pomodoro is the timer)
3. Work on the task until the Pomodoro rings, then put a check on your sheet of paper
4. Take a short break (5 minutes is OK)
5. Every 4 Pomodoros take a longer break

Pretty, simple, right? Here is why I think the system is so effective.

The pomodoro timer ticks.

The pomodoro timer ticks while you are writing. I find that ticking sound to be effective at keeping me concentrated. It is like a subconscious reminder that I am supposed to be writing. Of course, my fingers are never keeping pace with the tick-tick-tick of the timer, but I can always try.

25 minutes of concentration.

There are many different theories out there about how long people can concentrate on one task. I used to think I could concentrate for 50 minutes; I have tried concentrating for 90 minutes to no avail. However, now that I am using pomodoro, I am finding 25 minutes of concentration to be optimal. I definitely can concentrate for 25 minutes.

The 5-minute breaks.

Oftentimes, I feel as if I could go longer than 25 minutes of concentration. However, I decided to try out the system and take a conscious break after 25 minutes. It turns out that, if I take a 5-minute break every 25 minutes, I actually can get in more 25-minute segments. Thus, even though I don’t always think I need the break every 25 minutes, I take it anyway, as it permits me to have longer writing endurance. Amazing.

One other reason I like the pomodoro iphone app is that the app keeps track of how many pomodoros (25-minute sessions) I have done for the day. That way, I don’t have to worry about keeping track myself. I can just look at my iphone and see how many pomodoros I have completed.

It may turn out that the pomodoro technique does not work for me forever. It might just be a new trick that has energized me for now. However, the effect has lasted long enough that I am confident in recommending this technique to you, especially if you feel as if you are in a writing rut and would like to get out of it.

Let me know in the comments section if the pomodoro technique works for you.

Secret to Successful Academic Publishing: Finding and Using a Model Article

As I was endeavoring to publish my first academic article, one of my advisers in graduate school, Ted Mouw, suggested I select a model article and use that to structure my article. I have since used this technique repeatedly and my experience leads me to believe that this is one of the secrets to successful academic publishing. My belief was confirmed when I read that Wendy Belcher also suggests a similar strategy in her book, Writing Your Journal Article in Twelve Weeks: A Guide to Academic Publishing Success.

In this week's post I will explain how to find and use a model article. A model article can serve as a guide for how long each section of your article should be, how many tables or interview quotes you should include, and how many citations are necessary in your field.

Where to find a model article

Your model article should come from the journal where you will submit your article. It does not have to have the same topical focus as your article, but should use similar data. If your article is based on interviews, your model article should also have interviews as the primary source of data. If your article has a complex conceptual framework, you should search for a model article that also uses a complex conceptual framework. If your article uses archival data, so should your model article.

What to do with a model article

Your model article will help you figure out both the structure and the approximate lengths of each component of your article. Once you have chosen a model article, the next step is to make an outline of the article, taking note of the length of each section of the article.

Here is an example of how to create an outline, based on an article I published in 2010:

Golash-Boza, Tanya. 2010. “Does Whitening Happen? Distinguishing between Race and Color Labels in an African-Descended Community in Peru” Social Problems.

Abstract:
This article explores how race and color labels are used to describe people in an Afro-Peruvian community. This article is based on analyses of 88 interviews and eighteen months of fieldwork in an African-descended community in Peru. The analyses of these data reveal that, if we consider race and color to be conceptually distinct, there is no “mulatto escape hatch,” no social or cultural whitening, and no continuum of racial categories in the black Peruvian community under study. This article considers the implications of drawing a conceptual distinction between race and color for research on racial classifications in Latin America.

Introduction
496 words

Conceptual Framework
437 words

Literature Review
(three sections)
1356 words

BACKGROUND AND METHODOLOGY
Background
593 words

Site Description
408 words

Methodology
396 words

RESULTS
- Eight Interview quotes
- Three thematic sections (corresponding to lit review)
6207 words

Conclusion
292 words

Implications for Future Research
391 words

As you can see, a model article can provide guidelines for common and not-so-common situations. It is a common issue for sociologists working with interview data to have to be selective about how many interview quotes to include in an article. In this article, I included eight interview quotes, which gives you a rough idea as to how many might be acceptable. A less-common situation is that you need to provide background information because of the relative unfamiliarity of the topic. As this article was based on research conducted in Peru, yet published in the United States, I included a background section on people of African descent in Peru. When searching for a model article, it is important to think about the particularities of your article and to try to find parallels in published articles.

Once you have created an outline, the next step is to match up the length of each section of your article with the sections of your model article. They don’t have to be exact, but if your model article has 1500 words in the lit review and 5000 in the results section, and your article has 3000 in the literature review and 3000 in the results section, that is an indication that you probably should present more data and condense your literature review.

You can create and use an outline based on a model article before you complete your article. In fact, having guidelines for the length of each section before you even begin can help you avoid the very common problem of writing an article that is far too long to be published.

I imagine some readers may feel as if their work is unconventional and does not fit into any mold. I understand and respect that position, but would like to gently remind readers that it is often best to learn the rules before one breaks them. Using a model article to imitate the structure (but not the content) of an article is one way to learn the unwritten rules of academic publishing.

How to Choose an Academic Journal for your Article ... and why you should choose one now!

Most academics are aware of the need to "publish or perish," and the current state of the job market makes the imperative to publish even more pressing. In this post, I discuss the first step to publishing a journal article: choosing an academic journal for your article.

The past few posts this semester have dealt with learning skills that enhance your scholarly productivity, including: planning your Fall semester, making time for writing, planning your week, and writing every day.

Time management and daily writing are skills and habits you can learn by practice. For example, I learned about the skill of daily writing in a class on writing with Sherryl Kleinman in 2004. However, I did not form the habit of daily writing until I joined an online discussion forum organized by Kerry Ann Rockquemore in 2007. That discussion forum encouraged participants to develop the habit of daily writing, and it worked wonders for my productivity. If daily writing has not yet become a habit for you, check out this post for more strategies on how to make writing part of your life.

Similar to time management and daily writing, publishing is also a skill you can learn. No academic was born knowing how to publish. We all learn by doing. The more you write and submit articles, the easier it gets. For the remainder of the semester, we will focus on the nuts and bolts of writing and publishing, drawing from my own experience publishing ten journal articles and two books and reading about academic publishing in venues such as Writing Your Journal Article in Twelve Weeks: A Guide to Academic Publishing Success, by Wendy Belcher. This post is dedicated to explaining how to find a home for your academic article. However, if you do not already have Wendy Belcher's book, I suggest you order it now!

How to Choose an Academic Journal

If you do not yet have an article ready for submission, there is no need to worry. You can decide where you will submit your article before you begin to write it. However, if you are reading this blog, it is likely that you have at least one seminar paper, thesis draft, or dissertation chapter that you could transform into a publishable article. If not, with daily writing, you will have a draft in no time.

Look in your bibliography
The first place to look for an appropriate journal to publish your article is in your own bibliography. The works you have cited are the works with which you are engaging in conversation. If you are citing several articles from a particular journal, that is a good sign that journal may be an appropriate place to submit your article.

Find other journals in your area
After looking through your own citations, have a look at other journals in your field. You can do this online. However, it can also be a great experience to actually go into the library and have a look at the journals in person. You also can ask your librarian area specialist. Many colleges and universities have librarians whose job requires expertise in academic publications. They can be a great resource when considering where to submit your article.

Figure out the impact factor and journal rankings
Journal ratings are important. A journal's rating is based on a variety of metrics, which are different ways of counting how many times the articles in the journal have been cited. Articles that have been cited more often are thought to have a greater impact in the field, and thereby bring prestige to the journal in which they were published.

Because journal ratings are important, you should take them into account before making a final decision about where to submit your article. Here are three ways to find out information on the relative quality of a journal.

1. You can use the software, Publish or Perish, to get data on the impact factor and citation rate of journals in your field.
2. You can access Web of Knowledge through your university's library to get rankings of the journals in a particular area or discipline. For example, Web of Knowledge lists rankings within the discipline of Sociology, but also within the sub-field of Race and Ethnic Relations.
3. You can visit the journal's website to find out information about the journal in question. When investigating a particular journal, you should try to figure out whether or not the articles in the journal are peer-reviewed, what percentage of submitted articles they accept, and whether or not the journal is accessible through major scholarly databases such as JSTOR, Elsevier, or Sage.

Once you have chosen a journal, you can begin to write or revise your article with an eye towards publication in that journal.